2. Once the "hours" are flashing,
press key
til the hours are correct.
3. Press key
"minutes" start flashing, press
key
minutes are correct.
4. Then set the date in the same
way.
Once everything is set, no numbers
should flash except for the colon
(:). If a number still flashes, press
key
2
change the settings for the PARK
LITE, the procedure can be repeated
by pressing and holding button
until the number "hours" starts
flashing.
several times until the
3
until the flashing stops. To
several times un-
3
again and the
2
27
2