Synco G1T Benutzerhandbuch Seite 7

3. External Mic Input
4. Mic Windshield & Device Installation
5. Reset
RESET
Gently poke the pin into Reset for 3 seconds to restore factory defaults.
6. Low Cut
7. Pairing
The system will pair automatically after power on. Manual pairing: long press the pairing
button on the TX and RX for 3 seconds.
TRS Mic Only
(Note: When using an external mic, please insert it into
the mic input properly.)
Short Press: 150Hz Low Cut On
Short Press again: Low Cut Off
Eject Pin
Long press for 3s
7