Herunterladen Inhalt Inhalt Diese Seite drucken

General Information; Operating Environment; Connected Devices - Renkforce 2623966 Bedienungsanleitung

4 port usb 3.2 (gen 1) hub (usb 3.0)
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating Instructions
4-Port USB 3.2 Gen 1 Hub (USB 3.0)
Item No. 2623966
1 Intended use
This compact USB hub adapter splits the USB‑A port of your computer into four USB‑A ports to connect
peripheral USB devices. The USB input plug and four output ports are USB 3.2 Gen 1 (USB 3.0) with a
data transfer rate of up to 5 Gbps. The product is designed with a USB‑C
of providing up to 10 W (5 V/DC, 2 A) of additional power to connected USB devices from an external USB
power supply.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided
under all circumstances.
If you use the product for purposes other than those described, the product may be damaged. Improper use
can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements. For safety and approval
purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third
parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
USB4
, USB Type‑C
and USB‑C
are registered trademarks of USB Implementers Forum.
®
®
®
2 Delivery content
USB hub

3 Latest product information
Download the latest product information at
the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
Read the operating instructions carefully.
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.

5.1 General information

The device is not a toy. Keep it out of the reach of children and pets.

Do not leave packaging material lying around carelessly. This may become dangerous playing material

for children.
If you have questions which remain unanswered by these operating instructions, contact our technical

support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an authorised repair

centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the

product.
5.3 Operation
If it is no longer possible to operate the product safely, take it out of operation and protect it from

any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be
guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport‑related stresses.

5.4 Operating environment

Do not place the product under any mechanical stress.

Protect the product from extreme temperatures, strong jolts, flammable gases, steam and solvents.

Protect the product from high humidity and moisture.

Protect the product from direct sunlight.


5.5 Connected devices

Also observe the safety and operating instructions of any other devices which are connected to the

product.
input port to add the flexibility
®
Operating instructions

www.conrad.com/downloads
or scan the QR code shown. Follow
6 Product overview
7
1 USB‑A (3.0) port
4 USB‑A (3.0) port
2 USB‑A (3.0) port
5 LED indicator light
3 USB‑A (3.0) port
6 USB‑C
7 Operation
1. Connect the USB‑A (3.0) plug (1) of the product to a USB port on a computer.
The computer will automatically recognize the product and install the drivers. No manual installation
Æ
is required.
2. Connect your peripheral devices to the USB‑A (3.0) ports (1, 2, 3, 4). The ports support USB devices,
such as USB flash drive, hard drive, keyboard, mouse, webcam, and others.
3. If the connected devices exceed the total available output power (4.5 W), connect a suitable USB-C
power source to the USB‑C
input port (max. 5 V/DC, 2 A, 10 W) (6) to increase the available power to
®
max. 14.5 W (4.5 W + 10 W).
4. After use, disconnect the product from the USB power supply.
8 Cleaning and care
Important:
– Do not use harsh cleaning agents, rubbing alcohol or other chemical solutions. They damage the
housing and can cause the product to malfunction.
– Do not rinse the product under the tap or expose to moisture.
– Do not immerse the product in water.
1. Before cleaning, disconnect the product from the power supply and connected devices.
2. Clean the product with a dry, fibre-free cloth.
3. Store the product in a cool, dry place, away from direct sunlight.
9 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste
at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately
from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by
the WEEE, as well as lamps that can be removed from the WEEE in a non‑destructive manner,
must be removed by end users from the WEEE in a non‑destructive manner before it is handed
over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take‑back of waste.
Conrad provides the following return options free of charge (more details on our website):
in our Conrad offices

at the Conrad collection points

at the collection points of public waste management authorities or the collection points set up by

manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
1
6
7 USB‑A (3.0) plug
input port
®
2
3
4
5
®

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis