Kibernetik Cyclon KVC-101 Dual Betriebsanleitung Seite 19

3 | Installation
Start-up:
•
Insert the connection head of the suction hose into the hose connector until it locks
in place. To do so, please press the buttons simultaneously. In order to release the
hose again, please press the buttons once more on the connection head.
•
Keep the buttons pressed down and then pull out the hose.
•
Insert the vacuum tube into the handle if required. You can adjust the length of
the telescopic tube by pushing the locking mechanism down and pulling on the
bottom section of the tube until it reaches a suitable length. When parking, shorten
the tube as far as possible.
•
The two special nozzles are used for particular vacuuming tasks, such as for
furniture, in the car, and so on. Detach the floor nozzle and fit one of the special
nozzles to the end of the telescopic tube.
Using the Appliance:
•
Fit on the accessory.
•
Unwind the necessary length of cable and insert the plug in a duly installed 230V
50Hz protective contact socket.
•
Press the on/off button to start and stop the vacuum cleaner.
•
Set the vacuum power with the vacuum power regulator.
Betriebsanleitung | Staubsauger Cyclon KVC-101 Dual weiss
19