Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Important Notes:
Before using the device, please read the user manual carefully and save it for future reference.
-Check whether the operating voltage of the machine corresponds to the local power supply voltage
before use.
-If the plug, power cord or the appliance itself is damaged, do not use it.
-If the power cord of this appliance is damaged, you must replace it to avoid danger.
-Keep electrical appliances out of the reach of children.
-Never absorb water or any other liquids, do not inhale flammable substances, do not inhale blades
or other sharp objects.
-Do not put the tube or any other accessories on the eyes or ears, and do not put it in your mouth
when it is connected to the vacuum cleaner.
-Please do not vacuum in unusual environments (such as cement, plaster), otherwise it will greatly
shorten the long life of the vacuum cleaner, or even damage the vacuum cleaner.
Preparation:
Assemble handle and tube
Connect the interface of the connecting tube to the handle. When the handle is locked at the round
hole of the handle and you hear the sound of the key being clicked, it will be installed in place.
If you want to connect the tube with a rope, hold the buckle with one hand, hold the connecting tube
with the other hand and remove it.
Assemble & disassemble the floor brush
1. Align the interface of the floor brush with the entrance of the dust bucket, and make sure that it
is not loose when pushed in place.
2. If you want to remove the floor brush, please hold the floor brush with one hand and the machine
with the other hand, and then remove the floor brush.
Werbung
