Xblitz GO SE Bedienungsanleitung Seite 23

Charging Indicator:
Connected with USB cable, the indicator being on means charging,
and being o means battery full charged.
MIC
Audio receiver
05. SPECIAL FUNCTIONS DESCRIPTION
1. G-sensor
When the sensor is on in the moment of collision, the file is automatically
protected from being overwritten. It is recommended to set the lowest
possible value (low or medium) so the camera does not detect road
inequalities.
2. Auto on/o
Supports to turn on and start recording automatically when car
starts after vehicle power supply connected and auto turn o
and save the videos after car shuts down.
3. Loop recording
The dashcam divides the recordings according to the selected time. You can choose
the length of the files. When the memory card becomes full, the oldest recording
will be overwritten.
4. Parking mode
When this function is turned on, the camera left in the car and plugged into the
power supply detects shakes of the vehicle (e.g. during parking collision), it turns
itself on and starts to record.
23
EN