Manual
Altitude / Hover
This is one of the default setting in the drone. When you release the Left Control Stick after the
ascending/descending action, the drone will hover at the current flight height. For a stable flight. press
the trim buttons to adjust accordingly.
360 °Flip
After flying the drone to a height over 2 meters, press the 360 ° flip button to activate 360 ° flip function.
Then move the Right Control Stick forward/backward/leftward/rightward to flip the drone accordingly.
Headless Mode
1. To ensure headless mode works well, please ensure corrent take off position as below picture shows
2. Long press the right upper button to active headless function. You will hear 2 beeps. In this mode,
the drone will fly following the direction of the Right Control Stick regardless of the positionof your
drone's s head or the tail. The LED on the drone will flash during headless mode.Long press the same
button again to exit this mode.
18
MODSTER Breezy
www.modster.at