Pushbutton; Connecting The Camera - Beeper RX-32 Bedienungsanleitung

KIT CONTENT
Micro-camera with stirrup
1
Power cable 8 m
2

CONNECTING THE CAMERA

WARNING • VEHICLES PROHIBITED FROM CONNECTING A CONSUMER TO THE BEAM
On certain vehicles, the +12 V reversing light is noisy when the engine is running, which can interfere with the proper functioning of
the reversing radar or the reversing camera kit. In other cases, this +12 V reversing light does not allow any additional consumers.
For all these vehicles, Beeper developed the RCAN R2 module to retrieve the +12 V reversing light information from the CANBUS
network. This module connects to the CANBUS of the compatible vehicle and allows to deliver a + 12V Reversing light for the
connection of a radar or a reversing camera
Réf: RCANR2, more info & list of compatible vehicles: http:/ /www.beeper.fr/radar-camera-de-recul/rcanr2.php
Green Loop = Template Lines
A
In order not to display the alert limits on the screen, all you need
to do is cut the green loop present on the camera
White loop = Mirror effect
To reverse the horizontal orientation of the camera (left / right)
you have to cut the white loop on the camera.
Bell saw (diameter 16 mm)
3

Pushbutton

4
8