On / Off Button; Horizontal Slope Setting In X-Axis (7 + 8) - geo-FENNEL FL 300HV-G EasyGRADE Bedienungsanleitung

EN
OPERATION - INSTRUMENT KEYPAD
8

ON / OFF BUTTON (1)

Press this button to power on and off the unit. If the red LED (2) lights the instrument is powered on.
After powering on the instrument the self-levelling procedure starts automatically. Thereafter, the laser
will rotate with 800 rpm.
If in normal use the LED (2) flashes the battery has to be recharged.

HORIZONTAL SLOPE SETTING IN X-AXIS (7 + 8)

Press the upper % button (7) to set the grade from 1% to 6%
Press the lower % button (8) to set the grade from 0,1% to 0,9%
Any value between 0,1% and 6,9% can be set in 0,1% steps
Both %-rows can be set individually or together.
The lasers acceptance of the %-value is stepless.
The chosen grade setting is indicated by the respective LED.
2nd axis (Y)
· Self-levelled
or
· Manual grade setting with the remote control (description
see page 28)
26
3
4
2
6
1
7
5