Key Management; Boot Menu - Tulpar T Serie Benutzerhandbuch

Select Change User Password to give or to abandon password setting same as
Change Administrator Password item above.
Note that Administrator Password field allows users to enter and change the settings of the
BIOS SETUP UTILITY, while User Password field only allows users to enter the BIOS SETUP
UTILITY without having the authorization to make any change.
The Password Check item is used to specify the type of BIOS password protection that is
implemented.
To clear a set Administrator Password/ User Password, just press [Enter] under Change
Administrator Password/ Change User Password field when you are prompted to enter the
password. A message box will pop up confirming password will be disabled.
Once the password is disabled, the system will boot and user can enter setup without
entering password.

Key Management:

Enables expert user to modify Secure Boot Policy variables without full authentication.

4.2.4 Boot Menu

• Set Boot Priority
Specifes the boot sequence from the available devices. A device enclosed in parenthesis has
been disabled in the corresponding type menu.
• Hard Disk Drive / USB Hard Disk Drive
Specifes the Boot Device Priority sequence.
• Boot Configuration:
Confgure Settings during
System Boot.
• LAN Remote Boot [Disabled]:
Boot from LAN or not.
EN
23