FARFISA INTERCOMS Astro-Serie Bedienungsanleitung Seite 8

EN
Function of buttons and meaning of signalling LED.
In stand-by
Button Short pressure (<1 s)
- It activates the electrical door lock release of the last external
station from which the call was received.
Long pressure (>3 s)
- If programmed on the last external station from which the
call was received, it activates EC/EM where present.
Button Short pressure (<1 s)
The function depends on the address stored in the button, in
detail:
- address of another flat or concierge unit, it calls the address
of that flat;
- address of another room in the same flat, it calls the device
on the other room;
- address of an actuator, the actuator is activated/deactivated;
- address of an external unit you connect to the door unit
without having previously received the call You enter auto-
matically in conversation.
Long pressure (>3 s)
The same functions as for short pressure and described above
can be activated.
Button Short pressure (<1 s)
The function depends on the address stored in the button, in
detail:
- address of another flat or concierge unit, it calls the address
of that flat;
- address of another room in the same flat, it calls the device
on the other room;
- address of an actuator, the actuator is activated/deactivated;
- address of an external unit you connect to the door unit
without having previously received the call You enter auto-
matically in conversation.
Long pressure (>3 s)
The same functions as for short pressure and described above
can be activated.
Button Short pressure (<1 s)
Opening conversation with the last door station from which the
call was received:
Long pressure (>3 s)
Enables/disables the exclusion of all ringtones. When the
ringtones are excluded, the icon LED
Flashes slowly
All ringtones are excluded
Flashes slowly
Door open signalling.
- 8 - Mi 2578
During call and conversation:
Short pressure (<1 s)
Activates the electrical door lock release of the external station
to which you are connected.
Long pressure (>3 s)
If programmed on the external station from which the call was
received, it activates EC/EM where present.
Short pressure (<1 s)
The only function that can be executed is the activation/deacti-
vation of a relay if the address of a relay is stored.
Long pressure (>3 s)
The same functions as for short pressure and described above
can be activated.
Short pressure (<1 s)
The only function that can be executed is the activation/deacti-
vation of a relay if the address of a relay is stored.
Long pressure (>3 s)
The same functions as for short pressure and described above
can be activated.
Short pressure (<1 s)
During the ringtone, it opens the conversation. During the con-
versation, it terminates the call.
Long pressure (>3 s)
Enables/disables the exclusion of all ringtones.When the
flashes slowly. ringers are muted, the icon LED
Flashes slowly on call and fast during audio level adjustment,
steady on in conversation.
Flashes quickly in call and slowly in conversation when all
ringtones are excluded.
Flashes slowly
Door open signalling.
Note. The terminals of the devices listed below send the door open signal:
- external stations: PB/GN(PB) of C.2124AB(TD2000. ) with suitable programming;
- 2281Q relay: IN/GN input port with factory setting.
flashes as shown below.