JOBYNA JB-HW-M09 Gebrauchsanweisung Seite 24

INSTRUCTIONS FOR USE
1. Press the power switch, the indicator light is on.
2. Wavelength selection: press the "R" key once, the LED power indicator will display green, and both red and
infrared light will be on; press the "R" key twice, only the near-infrared light will be on (not visible to the naked
eye, slightly glowing in dark light) ), the red light is off; press the "R" key 3 times, only the red light is on, and the
near-infrared light is off; press the "R" key 4 times, all the LED lights are off.
3. Temperature selection: the default temperature is 39°C±2, press the "°C" key once, the LED power indicator will
display blue, and the heating temperature of the product is 43°C±2; press the "°C" key twice, the LED power
indicator shows red, and the heating temperature of the product is 47℃±2;
4. Pulse selection: Press the "R" key to set the wavelength mode, and then press the "P" key to start the
corresponding wavelength pulse mode;
5. Timing selection: press the timing button, press "Ⅰ" for 10 minutes, the 10min indicator light is on, "Ⅱ" is set for
20 minutes, the 20min indicator light is on, press "Ⅲ" for 30 minutes, the 30min indicator light is on, the timer
defaults to start for 30 minutes. Timing setting includes red light, infrared, temperature, pulse all modes. And
product will auto shut off when the time is up.
22