Problem Solving; Technical Data - pietranera ROCKET 740 Bedienungsanleitung

4. INSTRUCTION
CAUTION
1
Check that the i commuter ( A ) is in " OFF " position.
2
Turn on the sterilise with the knob ( A ).
3
Regulate the intensity of the heat of the sterilizer using the regulator of in-
tensity (C).
4
Set the work time, from 1 to 60 minutes, with the timer ( B ).
Recommend temperatures:
To sterilize metallic tools like scissors, blades or razors, etc......
to set temperature not less than 110°C .
Temperature can chenge in spite of type and quality of tools to be sterilized. It is
really important that temperature is not less than 110° C .
Do not sterilize plastic tools since they con melt.
Maximum temperature reachable is: 250 ° C .
5. MAINTENANCE
This apparatus doesn' t require a particular maintenance; we recommend to keep
clean from dust. This operation can be done also from not specialized personal,
but before e ecting any cleanin, make sure that the appliance es unpluged.
6.

PROBLEM SOLVING

If pressing the general interruptor " A " and the appliance does not turn on, check
that the plug is well insered into the socket.
In case of any disfunction contact permitted technicians only.
7.

TECHNICAL DATA

See back side of appliance
FOR USE
check that the electric supply of net is equal to the suitable
one on the lable situated nameplate on the rear of the
apparatus.
15
we recommend