Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Start Electrical Support; Machine Stopping / Parking; Charger - Zipper ZI-EWB300-160L Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

13.2

Operation

13.2.1

Start electrical support

13.2.2

Machine stopping / parking

13.3

Charger

Charging the battery:
Voltage display on battery box system indicates the status of the battery:
Voltage display shows 42 V
Voltage display shows 35 V
Voltage display shows < 30 V
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
1.
Turn ON-Off-Switch (1) to Position „I"
2. Turn switch (1) on the handle to "0" BAS activated /EBS de-
activated.
BAS = Brake assistance if no electronic support is re-
quested
EBS = Electronic Brake: Machine is braked and braking ef-
fect is maintained as long as
- until battery empty
- until EBS is deactivated again
3. Turn the right-hand control handle (2) to adjust the
strength of the electrical support, the further the handle is
turned counter clockwise (+) the stronger the support.
Note: no activation on electrical support means BAS active
(braking effect noticeable)
Note: If EBS is set to "I", no electric drive assistance in for-
ward or reverse direction.
1.
Turn ON-Off-Switch (1) to Position „I"
2. Switch (1) on the handle set to "0" BAS activated.
The machine must be braked by manually by manpower
when used on slopes.
3. Switch (1) on the handle set to "I" EBS activated
The machine brakes until it comes to a complete stand
still and the braking effect remains active as long as the
switch is set to position "I". Also holds the machine in posi-
tion on slops up to 20%. If the machine is to remain in po-
sition for a longer period of time, first bring it onto level
ground and secure it against rolling away ( chock under
the wheels)..
Note: Braking function EBS requires battery energy, de-
signed for short times only (max. 15 minutes)
1. remove battery from battery box
2. connect the charger to the power supply (socket) 230 V
/ 50 Hz and the charging socket (1)..
3. battery charging
4. When the battery is fully charged (display on the char-
ger), disconnect the charger again.
5. charging status is indicated by pressing button (2) on
the display (3).
Battery capacity 100%
Battery capacity ~50%
Please charge the battery (too less capacity left)
OPERATION
21
ZI-EWB300-160L

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

9120039234700

Inhaltsverzeichnis