dibea UV-10 Bedienungsanleitung Seite 7

Troubleshooting Troubleshooting Troubleshooting
cause
The power button hasen't been
The machine
turned on
doesn't work
Power connection error
The dust tank is blocked by dust
The suction
The filter is blocked by dust.
becomes weak
The air outlet is blocked.
The cleaned objects do not have
strong reflection or the distance is
too long.
The machine is placed vertically
The UV light
The two transparent films on the
doesn't work
bottom of the machine are covered
by dust.
solution
Check the power cord and
power plug is intact
Press power button
Clean the dust bin.
Clean the filter.
Clean the air outlet.
Usually, the machine will turn on
the UV light automatically when
approaching the objects(5cm)
Angle is greater than 30°
Clean them with half-wet
cotton cloth.