Etherma LAVA-BASIC-325EP Montage- Und Gebrauchsanleitung Seite 13

W A L L A N D C E I L I N G M O U N T I N G
INSTALLATION OF THE INFRARED HEATING DEVICE:
Please check the power cable on the infrared heater and on the
surface before installation. These items must not be damaged.
1. Select the position for the mounting rails according to the il-
lustrations on page 6.
2. Drill holes according to the specified hole spacing on page 6
3. Screw on fixing rails with suitable dowels and screws.
4. Connect the infrared heater and push it into the mounting rail.
5. Check the infrared heater for tight fit in the holder.
NOTE: screws and dowels are not included in the delivery.
They must be chosen according to the building material of
the wall or ceiling.
NOTE: the device must not be installed directly under a po-
wer socket.
13