MASCOT 210127 Bedienungsanleitung

MANUAL: ELECTRIC CORKSCREW -
MODEL NO.: 210127
GENERAL INFORMATION:
• In order to guarantee safety and maintain the quality of the product,
please read all instructions prior to use. Store this manual. If you give this
appliance to someone else, please also give them these instructions.
• Only use this product according to the instructions in this manual.
• The corkscrew is only intended for uncorking wine bottles with a natural
or plastic cork. This product is not intended for uncorking champagne
bottles or removing any other types of bottle closures such as crown or
screw caps.
• Clean the housing and foil cutter with a slightly damp cloth.
• Not intended for professional use.
WARNING:
• Do not submerge the appliance in water or any other liquid to prevent
injury or damage to the product.
• Make sure the corkscrew does not get wet.
• Be careful with the point of the corkscrew and the foil cutter.
• Keep this product out of reach of children.
• Do not disassemble the product yourself, otherwise the warranty
becomes invalid.
• Do not force the product onto a bottle and do not try to make the
mechanism go faster.
• This product will work at its best when it works at the intended speed.
• Keep the product away from flammable, explosive gas.
PARTS
1. Battery cover
2. Up button
3. Blue LED light
4. Down button
5. Foil cutter
INSTALLING THE BATTERIES
Hold the corkscrew firmly and rotate
the battery cover to open it. Place
4 AA batteries against the correct
connection. Place back the battery
cover and rotate it to lock it.
When this product is not
used for a long period of time,
remove the batteries to prevent
possible damage caused by
leaking batteries.
Mascot Online BV
Veluwezoom 32
1327 AH Almere
The Netherlands
www.magnani-online.nl
USE
1. Remove the foil cutter from the
corkscrew and place it against the neck
of the bottle, firmly hold the wine bottle
and firmly press the foil cutter together,
rotate it one to two circles around the
foil closure and cut off the foil.
2. Firmly hold the bottle with one hand
and the corkscrew with the other. Place
the bottom of the corkscrew on top of
the bottle and make sure the corkscrew
is in line with the bottle as vertically
as possible
3. Hold down the down button and lightly
press the corkscrew downwards at
the same time The corkscrew rotates
clockwise and enters the cork. Then
gradually remove the cork from the
bottle in 6-8 seconds using the up
button. When the cork has been
pulled out fully, the wine opener stops
automatically. Let go of the button and
remove the opener from the bottle.
4. Hold the up button for 5-7 seconds,
the cork comes out of the opener
automatically. Let go of the button
and the opening process has
1
been completed.
2
TROUBLESHOOTING DURING USE
3
4
If the bottle opener does not work or stops during uncorking:
• Check that the batteries are placed correctly.
• Ensure there is sufficient battery power.
• Check that the wine opener is vertically aligned with the wine bottle
during opening.
When the above has been checked and everything has been found to be in
order, but the opener still does not work correctly, please contact the seller
for maintenance.
5
INSTRUCTIONS FOR THE PROTECTION OF THE ENVIRONMENT
(WEEE, Directive on Waste Electrical and Electronic Equipment)
disposed of in normal domestic waste, but must be taken to a special
collection point for the recycling of electrical and electronic equipment.
The waste container marked with a cross symbol on the item, in the user
manual and on the packaging informs you of this. The raw materials used
are suitable for recycling.
By recycling used appliances or raw materials you are making an
important contribution to the protection of our environment. You can find
out the location of your nearest collection point from your local council.
Never throw batteries away with household waste. Do not throw away
batteries, but take them to a local collection point for recycling. Contact
your local council for more information.
EN
Your product has been manufactured from high quality
materials and components which can be recycled and
used again. At the end of its life, this product can not be
1