Cleaning And Maintenance - rawlink 66734 Gebrauchsanweisung

5. Attach the safety ring (A) around the
hook (E) on the bracket at the bottom of
the bike holder and tighten the � nger
screw.
6. Place the holders (G) over the carrier
arms and screw them tight with a
screwdriver. Hang the bikes on the
cycle holder and secure them using
the rubber straps. Make sure the front
wheels of the bikes are secure so that
they cannot rotate or move while you
are driving.
7. Once you have � nished using the bike
holder, remove the bikes, loosen the
� nger screw (F) and lift the safety ring
(A) off the hook (E) at the bottom of the
bike holder.
20
8. Push the locking pin (D) out, press the
locking device so that it loosens and
push the legs together so that the
clamps (B) loosen. Be careful not to trap
your � ngers!
Carefully lift the bike holder off the car's
towbar.

Cleaning and maintenance

Wipe the bike holder with a well-wrung
cloth with a small amount of detergent
added, if necessary. Regularly lubricate
all moving parts with a lubricant spray or
similar.