Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
60 W Digital Soldering Station
Item No. 2613254
Intended use
The product is a soldering station that can be used to create soldered connections through
soft-soldering. The appliance is designed for private use. This product is not intended for com-
mercial use.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Soldering station
• Sponge
• Soldering stand
• 1x ø1 mm solder roll
• 3x spare tips
• 1x ø1.5 mm solder roll
Up-to-date operating instructions
Download the latest product information at
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
Ensure proper ventilation during soldering. Solder and flux vapours can be harmful
to your health.
Read the operating instructions carefully and especially observe the safety infor-
mation.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) Important safety information
• This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and/or knowledge if they have been given supervision
or instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by
children without supervision.
• WARNING - This tool must be placed on the stand
when not in use.
• Operating instructions
www.conrad.com/downloads
or
b) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dan-
gerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• In schools, educational facilities, hobby and DIY workshops, the product must be
operated under the supervision of qualified personnel.
c) Electrical Safety
• The product is built according to protection class I. It must be powered by a stand-
ard earthed mains socket.
• The mains socket that you use to connect the power cable must be easily ac-
cessible.
• Before connecting the product, make sure that the mains voltage in your region
meets the specifications on the name plate. Only connect the product to the mains
socket when it is switched off.
• Do not pull the mains plug from the mains socket by pulling on the cable.
• Do not touch the mains cable or the workstation if there are any signs of damage,
as this may cause a fatal electric shock!
• If the mains cable is damaged, it must be replaced by a new mains cable with
the same specifications. Stop using the damaged mains cable and dispose of
it in an environmentally friendly manner. Do not attempt to repair the damaged
mains cable.
• Never use the product immediately after it has been brought from a cold room
into a warm one. This may generate condensation, which can cause the product
to malfunction or damage the interior components. Moisture on the workstation,
mains cable or power adapter may also cause a fatal electric shock!
• Never work on or solder live electrical components or parts. Always disconnect
these components from the power supply beforehand.
• Caution!
• If liquid does enter the workstation, switch off the mains voltage to the socket con-
taining the mains plug (switch off at the corresponding circuit breaker or remove
the safety fuse and then switch off at the corresponding RCD protective switch).
You can then unplug the power adapter from the mains socket.
• Discontinue use immediately and take the product to a specialist repair shop or
dispose of it in an environmentally friendly manner.
d) Operation
• Never touch the element or tip of the soldering iron. Risk of burns!
• Hold wires to be heated with tweezers or clamps.
• Never use the soldering iron to heat up liquids.
• Never solder live electrical components or parts. Always switch off the power
before-hand.
• Do not cover or fasten any items to the soldering iron. Otherwise there is a risk
of fire.
• Touching or soldering capacitors (or similar components) or leads/cables that are
connected to capacitors may cause a fatal electric shock! Capacitors may stay
charged for several hours after you switch off the power supply!
• Always solder on non-flammable surfaces. Protect other materials nearby from
damage through heat.
• During breaks, set it down on an even and heat/fire resistant surface to cool down;
make sure that it cannot roll or fall.
• Risk of fire or explosion! Do not use around or near explosive or flammable ma-
terials.
• Turn off the power while taking breaks or finishing using.
Werbung
