Auto Restart Function - Sharp DF-A1E Bedienungsanleitung

DO NOT use any other AC adapter or lead with your Aroma
Diffuser as this may cause overheating and potentially
hazardous conditions. DO NOT use USB power extension cables
as these may cause the voltage to drop and result in the Aroma
Diffuser working incorrectly.
4 Connecting to the AC Adapter on page 2).
(Refer to the
When connecting to the AC adapter ensure that the socket and
plug fit securely together before plugging the AC Adaptor into
the mains supply. Loose fitting plugs will cause either erratic or
no operation.
Ensure that the water level is filled to the maximum level before
use; the maximum level is marked clearly inside the cup and
must not be exceeded.

Auto restart function

Your SHARP Aroma Diffuser has a unique feature whereby it
will turn on automatically whenever the supply is connected.
This handy feature allows you to use the unit with a smart plug
enabling remote control operation.
5 Connecting your Aroma Diffuser via a Smart
(Refer to the
Plug on page 2).
The Auto Restart function will not work if the water level is too
low. Ensure that before using this advanced feature that the
water is at the maximum level and that, if necessary, there is oil
in the device.
When using the Auto Restart function, ensure that the lid is
fitted correctly and securely before doing so. If the lid is not
fitted correctly, water may spill out of the unit.
Essential oils
This Aroma Diffuser is compatible with the majority of essential
oils available from many suppliers. It is recommended that
only a 3-5 drops of oil are used with each maximum level fill of
water. Follow the usage advice supplied with the essential oil
for best results.
Before using essential oils, check the warning labels for allergy
advice.
Cleaning
After every use, clean the Aroma Diffuser cup and lid with a
soft cloth.
6 Cleaning your Aroma Diffuser on page 2).
(Refer to the
DO NOT use strong alkaline or acidic cleaners.
DO NOT use abrasive cleaners or abrasive cleaning cloths.
EN