Ego Power+ FN1800E Bedienungsanleitung Seite 8

DESCRIPTION
EN
KNOW YOUR MISTING FAN (Fig. A & Fig. A1)
1. Top Handle
2. Fan Enclosure
3. Fan Enclosure Lock Knob
4. Wheel (x2)
5. Misting Nozzle (x4)
6. Telescopic Handle
7. Battery Compartment
8. Intake Tube
9. Filter
10. Control Interface
11. Power Button
12. Air Speed Indicator
13. TURBO Indicator
14. TURBO Button
15. Air Speed Adjustment Button
16. Misting Mode Selection Button
17. Misting Indicator
ASSEMBLY
WARNING:
If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product
or create accessories not recommended for use with this
fan. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING:
Always remove the battery pack from
the product when you are assembling parts, making
adjustments, cleaning, or when the product is not in use.
Removing the battery pack will prevent accidental starting
that could cause serious personal injury..
ASSEMBLING THE WHEELS (Fig. B)
1. Align the hole of one of the wheels with the wheel
axle of the fan, and mount the wheel onto the axle.
2. Thread one of the wheel screws through the hole of
the wheel into the wheel axle, then tighten the screw
with the supplied wrench.
3. Snap the hubcap onto the wheel.
4. Assemble the other wheel following above steps 1 - 3.
ATTACHING THE TOP HANDLE (Fig. C)
1. Align four supplied screws with the holes in the top
handle and the holes in the fan enclosure.
8
56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E
2. Insert the screws and then tighten them with the
supplied wrench.
Fig. B and Fig. C parts description see below:
B-1 Wheel (2) B-3
B-2 Wheel Axle (2) B-4
C-1 Top handle C-2
C-3 Screw Hole
OPERATION
WARNING:
Do not allow familiarity with this product
to make you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories not
recommended can result in serious personal injury.
Before each use, inspect the entire product for damaged,
missing, or loose parts, such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced.
WARNING:
Always remove the battery pack from
the product when you are assembling parts, making
adjustments, cleaning, or when it is not in use. Removing
the battery pack will prevent accidental starting that could
cause serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
◾
General ventilation in most household applications
◾
Outdoor cooling while connected to a water source
ADJUSTING THE FAN ANGLE (Fig. D)
1. Grasp the top handle to hold the fan enclosure.
2. Rotate the fan enclosure lock knob
COUNTERCLOCKWISE to loosen the adjustable fan
enclosure.
3. Tilt the adjustable fan enclosure forward or backward
to your desired angle. The fan can pivot up to 90°
forward up to 135° backward.
4. Rotate the lock knob CLOCKWISE to secure the fan
enclosure at your desired angle.
TO ATTACH/DETACH THE BATTERY PACK (Fig. E)
Use only with EGO's battery packs and chargers listed in
Fig. A2.
Screw with
Washer (2)
Hubcap (2)
Screw With
Washer(4)