Ego Power+ FN1800E Bedienungsanleitung Seite 12

TROUBLESHOOTING
EN
PROBLEM
Tool does not work.
There is no water
misting and the
misting indicator
flashes two green
lights.
Water leakage
happens after
fan enclosure
maintenance.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
12
56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E
CAUSE
◾
Low battery pack capacity.
◾
The battery pack or the fan is too hot.
◾
The intake tube suctions no water,
activating internal protection for the water
pump inside the tool.
◾
The misting nozzle(s) got clogged
during operation, activating the internal
protection for the water pump.
◾
The nut connecting with the intake tube
got loose unexpectedly.
SOLUTION
◾
Charge the battery pack.
◾
Turn off the fan and allow the fan and
battery pack to cool.
◾
Check and ensure that there is enough
water in the bucket and the intake
tube is properly immersed into the
water.
◾
Clean the nozzle(s) according to the
"NOZZLE MAINTENANCE" chapter
and reassemble them as instructed.
◾
Open the fan enclosure according
to the "FAN ENCLOSURE
MAINTENANCE" chapter. Inspect and
ensure that the nut is fully tightened.