Werbung
Quicklinks
EN INSTALLATION & OPERATING INSTRUCTIONS
FR INSTRUCTIONS DE MONTAGE DU SUPPORT
DE STANDAUFBAUANLEITUNG
NL STAND MONTAGE INSTRUCTIES
IT ISTRUZIONI PER IL MONTAGGIO DEL SUPPORTO
ES INSTRUCCIONES DE MONTAJE DEL SOPORTE
MODELS COVERED BY THIS MANUAL:
Hawaii Wave 2000
200622
HERSCHEL HAWAII WAVE 2000 Watts
Freestanding Infrared Heater
STAND ASSEMBLY INSTRUCTIONS
Werbung
Verwandte Anleitungen für Herschel HAWAII WAVE 2000
Inhaltszusammenfassung für Herschel HAWAII WAVE 2000
- Seite 1 HERSCHEL HAWAII WAVE 2000 Watts Freestanding Infrared Heater STAND ASSEMBLY INSTRUCTIONS EN INSTALLATION & OPERATING INSTRUCTIONS FR INSTRUCTIONS DE MONTAGE DU SUPPORT DE STANDAUFBAUANLEITUNG NL STAND MONTAGE INSTRUCTIES IT ISTRUZIONI PER IL MONTAGGIO DEL SUPPORTO ES INSTRUCCIONES DE MONTAJE DEL SOPORTE...
-
Seite 2: Parts Included
PARTS INCLUDED: - 1 Base with Feet Fitted - 1 Bottom Straight Pole - 1 base avec pieds ajustés - 1 poteau droit inférieur - 1 Basis mit montierten Füßen - 1 untere gerade Stange - 1 basis met gemonteerde voeten - 1 onderste rechte paal - 1 base con piedini montati - 1 palo dritto inferior... -
Seite 3: Installation Instructions
INSTALLATION INSTRUCTIONS: Step 1: ENGLISH Feed the cable up through the hole in the bottom of the base plate. Feed the end with the small connector not the 3-pin plug end. Now feed the cable up through the bottom pole (at the end with the fixing plate) so that the cable ends up hanging out of the top. - Seite 4 Step 2: ENGLISH The top curved pole will arrive with the cable and plug fitted. Connect the cable from the bottom pole to the cable from the top pole and then slot the top pole into the bottom pole. Using one M6 allen screw locate the hole on the back below the join and fit the screw. You will require the allen key supplied for this.
- Seite 5 Step 3: ENGLISH Insert the M8 eye bolt into the threaded hole located at the top of the curved pole. Attach the Hawaii 2000 to the eye bolt using the Carabiner clip (supplied with the Hawaii). Plug in the top of the cable to the Hawaii making sure to line up the pins correctly. Screw the two halves together sealing the inside of the plug.
- Seite 7 PARTS LABELLED - 1 M8 Eye Bolt - 1 Top Curved Pole with cable - 1 boulon à œil M8. - 1 poteau incurvé supérieur avec cable - 1 M8 Ringschraube - 1 obere gebogene Stange mit Kabel - 1 M8 oogbout - 1 Top gebogen paal met kabel - 1 bullone a occhiello M8 - 1 palo curvo superiore con cavo...