THOMSON Serea Screeny Bedienungsanleitung Seite 15

Installation
1. Insert one end of the RJ11 cable into LINE jack of the phone, the other connect
with local network.
2. Use coiled cord to connect the base and handset. The Jack is located on the left
side of the unit. Do not connect to the EXT jack on the rear of the unit.
3. The installation of the battery
This product requires 3 AA batteries to keep the display on for the setting.
Without the batteries, it is always possible to dial a number by using the
telephone wire.
Telephone Jack
Open the battery
compartment locates on the
back of the unit.
Insert 3 AA batteries
14