Special Safety Instructions - Probuilder 99008 Gebrauchsanweisung

Special safety instructions

Before use, check that the mounted saw is
securely attached to the mitre saw stand.
The distance
between the
mounting holes in
the saw's feet must
not exceed 374 mm.
Follow the safety instructions that apply to
the saw you use along with the mitre saw
stand.
Assembly
1. Place the frame (1) on a mat or similar
so that it does not get scratched. Tilt the
frame legs fully out so that the spring
lock is released.
2. Insert the workpiece supports (7) into
the holders at each end of the stand
extensions and screw them tight using a
�nger screw (2).
GB
19