arva EVO5 Inbetriebnahme Seite 13

3.2.3/ STEP 3: FINE SEARCH
When the screen indicates that you are "3 meters" from a
burial, your device will no longer indicate a direction. At this
point you need two conduct a fine search using a "cross
pattern".
Example of fine
search technique
1. Position your device near snow level.
12
2. Move your device in a cross pattern to locate the point
where the distance reading is the lowest.
Marking function: When you are less than
3 meters from the burial(s), a marking
icon blinks in the upper right-hand corner
of the screen. Press the marking button
to mark the victim. The device will start
searching for the next victim without any
1st probing
already marked burial(s) interfering.
point
In a multi-burial situation, as soon as
you mark a victim, step 1 meter away to prompt the device
to more quickly start searching for the next buried victim.
When you mark a victim, a flag appears next to that victim's
icon.
3.3/ AUTOMATIC REVERT-TO-TRANSMIT MODE
In the event of a secondary avalanche, the automatic re-
vert-to-transmit mode allows the device to automatically
switch back to transmitting a signal. In search mode, the
device will beep every 8 minutes and the "AUTO-REVERT"
icon will appear on screen asking the user to confirm they
would like to continue in search mode. Press on the marking