arva EVO5 Inbetriebnahme Seite 10

3.1/ GROUP AND FREQUENCY CHECK
Before starting your outing, check to make sure that every-
one's device is in transmit mode and working properly. The
group leader should switch their device into GROUP CHECK
mode to check the devices of the other members in the
group.
When turning on the EVO5 in transmit mode, it will prompt
you to switch to GROUP CHECK mode. To enter GROUP CHECK
mode, push on the marking button when the GROUP CHECK
icon is blinking in the upper part of the screen.
You will then be able to test your partners' devices one by
one by positioning your device 1m away from each device
you check.
In GROUP CHECK mode, the EVO5 starts by analyzing the
transmit frequency. If the frequency does not comply with
current standards, a "no" message will appear indicating
that the device being checked is defective and should be
sent to customer service. If the frequency meets the stand-
ard, a distance reading will display on your screen and you
PRESS may then proceed to checking transmit power :
EN
1M
9