N'oveen PTC09 Benutzerhandbuch Seite 17

Set heating power switch (1) and temperature regulator (2) as follows:
Heating power regulation
Rotary switch on []: lower heating power (1000 W)
Rotary switch on [ ]: higher heating power (2000 W)
Temperature regulation
– Set the rotary switch to a position between MIN and MAX.
Rotary switch to the left (MIN): lower room temperature
Rotary switch to the right (MAX): higher room temperature
When the desired temperature has been reached, the blower shuts off automatically. To increase the
room temperature, turn the rotary regulator further to the right.
Ventilation without heat
• Turn temperature regulator (2) to the right
• Set heating power switch to [].
• The device ventilates with unheated air.
Switching off
Set heating power switch to [OFF].
Cleaning
• Switch off the device and let it cool off completely.
• Pull out the plug.
• Wipe the device with a slightly damp cloth.
17