Help In Case Of Errors - AVM FRITZ!DECT 200 Installation Und Bedienung

Help in Case of Errors

No Connection to FRITZ!Box
The DECT LED flashes briefly at regular
intervals.
1. Insert FRITZ!DECT into an outlet near
your FRITZ!Box.
2. When the DECT LED lights up, the
pre vious outlet is located outside the
range of the FRITZ!Box, or the wireless
connection is faulty.
Typical sources of interference include
closed doors and zones with high
humidity (damp walls, clothes drying
racks).
If the outlet is outside the range of
the FRITZ!Box and needed there,
use a FRITZ!DECT Repeater.
If the DECT LED continues flashing,
FRITZ!DECT 200 is not registered with the
FRITZ!Box. Register FRITZ!DECT 200 again.
Socket Switched Off
14
The On/Off LED flashes briefly at regular in-
tervals and the connected electrical device
does not work. The socket is switched off.
1. Remove the electrical device from the
FRITZ!DECT 200 socket.
2. Press the On/Off button. The socket is
switched back on.
The On/Off LED lights up.
3. Insert the electrical device back into
FRITZ!DECT 200.