Rear Panel - Kindermann 7488000150 Inbetriebnahme- Und Bedienungsanleitung

Rear panel

1
No. Name
1
ETHERNET
2
HDBT OUT
3
SOURCE
4
LOOPOUT
5
ARC OUT
AUDIO
6
OUT
7
IR IN
8
IR OUT
9
RS232
FIRMWARE
10
UPGRADE
BUTTON
11
DC 24V
2 3
Description
RJ45, connect to your IP network switch. Network data will
be "tunneled" to/from the receivers ETHERNET port.
RJ45, connect to the HDBT input of the receiver. LINK LED
lights up when a HDBaseT link has been established.
HDMI, connect to a source device.
HDMI, connect to a local display.
Toslink, for ARC audio output, connect an audio device
(e. g. amplifier).
3,5 mm jack, for audio de-embedding of the HDMI input
signal, connect an audio device (e. g. amplifier).
3,5 mm jack, connect the IR receiver for IR pass-through.
3,5 mm jack, connect the IR emitter for IR pass-through.
Connect a RS232 control device (e. g. media control system)
for pass-through or connect a device which shall be control-
led by RS232 commands from the receiver side
(e. g. signal switcher).
Please contact support.
Connector power supply unit.
200.00 mm
4 5 6
200.00 mm
7 8 9 10 11
15