LENCO SB-042LEDBK Benutzerhandbuch Seite 13

C. Connect to Other Devices
If your device only has one 3.5mm output you will need to use a 3.5mm audio cable (not supplied).
D. Connect to Bluetooth Device
1. Press the BT button and select BT mode or press button on your remote control to switch to
Bluetooth mode. The BT
2. Pair your Bluetooth device and select "Lenco SB-042LED". When successfully paired, you will hear
'Connected', and the BT
3. The Soundbar will reconnect to the last paired device when switched on.
DIGITAL
Optical cable
BETTER
light will flash and you will hear 'Bluetooth Mode, Pairing'.
light will stay lit. If your device requests a password, enter "0000".
HDMI ARC
cable
BEST
12
3.5mm to RCA
audio cable
GDDD
Lenco SB-042LED