Accessories - Varjo Aero Benutzerhandbuch

pressure on your head, and the cushion should feel comfortable on
EN
EN
your face.
When you put on the headset, it will adjust the lenses automatically
based on your interpupillary distance. This setting is on by default.
We recommend that you keep the setting on. Switch off the setting if
the automatic adjustment does not work for you, for example due to
eyeglasses, sensitivity to infrared light, or any conditions that impair
your vision. If you switch off the automatic adjustment, you may feel
discomfort when using the headset.
Reflective surfaces
Please be aware that reflective surfaces may interfere with positional
tracking.
Care and maintenance
Handle the headset with care and keep it in a clean and dust-free
place.
Sunlight and external light sources
Do not leave the headset in direct sunlight or strong ultraviolet light.
Exposure to direct sunlight can damage the optics and display. Do
not shine a laser or an external light source through the lenses.
Damage
y Do not drop or bend the headset or knock it against other objects.
y Lift the headset by holding the headset body or the headband.
y Do not lift the headset by holding the cushions or cables.
y Do not step on the cables.
Damage requiring service
Use only qualified personnel to service the headset. Contact an
authorized service facility if:
y The headset has been exposed to liquid or dropped.
y The headset has been subjected to impact or is damaged.
y The headset overheats.
y The headset does not operate normally when you follow the
operating instructions.
Cleaning
Unplug the headset from its power source before cleaning. Clean
the headset body with non-abrasive anti-bacterial wipes. Do not use
soap, harsh chemicals, alcohol, cleaning solvents, liquid cleansers,
or aerosols. Never use water to clean the headset. Clean the headset
lenses and front plate gently with optical lens wipes or a microfiber
lens cloth. Do not clean the lenses with any liquid or chemical
cleansers. Clean the cushions with non-abrasive anti-bacterial wipes.
Device temperature
It is normal for the headset to feel warm to the touch while in use.
The air ventilation surfaces in particular may get hot. Prolonged
skin contact with a headset that is hot to the touch may cause skin
discomfort or redness, or low temperature burns. If your headset
feels hot to the touch or is uncomfortably warm, stop using it and
allow the headset to cool down.

Accessories

Do not use the headset with any unauthorized or incompatible
accessories or software. Using unauthorized accessories or software
may cause performance issues or result in injury or damage. Check
varjo.com/support for a list of compatible accessories or software.
Operating and storage
environment
Placement
Use the headsets only in adequately ventilated areas.
y Do not cover the headset.
y Do not cover the ventilation holes on top or at the bottom of the
headset.
y Do not place the headset near objects that could scratch the
lenses.
y Do not expose the headset to open flames or lit smoking products.
y Do not place the headset near heat sources, hot areas, or extreme
temperatures.
y Do not use the headset near water or other liquids.
y Do not use the headset after a dramatic change in temperature.
When you move the headset between environments with very
different temperatures and/or humidity ranges, condensation may
form on or inside the headset. Allow enough time for the moisture
to evaporate before using the headset.
Note: When you move the headset from low-temperature conditions
into a warmer environment or vice versa, allow the headset to
acclimate to room temperature before you turn it on. Use the headset
12