Dane Techniczne; Technical Data - Orno OR-WAT-435 Bedienungsanleitung

Zakres wyświetlanej skumulowanej energii elektrycznej:
Skumulowany koszt energii elektrycznej:
Zakres ustawiania kosztu energii elektrycznej:
EN
The device is designed to analyze energy used by electric appliances. It can be installed in an easy and fast way by connecting it
between the socket and the power plug of the device you want to control. This power meter is suitable for use with standard power
sockets only (230V AC). The maximum load of the socket cannot exceed 3680W. In order to forecast the cost, you need to enter a
unitary price for electric energy (currency in EUR). This device cannot be calibrated thus it cannot be used as consumption costs
calculator. It is not suitable for use in moist areas, nor in inadequate conditions.
Inadequate conditions include:
- wet or increased humidity areas,
- dust, flammable gases, vapors, dissolvents,
- storm or other harsh weather conditions that can generate strong electrostatic field, etc.
RESET button:
Before first use, make sure to reset the device with the RESET button.
If the device does not respond when you press the buttons, make sure to reset it with the RESET button.
Once you plug in the meter, all icons will be visible on the LCD display for about 1 second. After this time, the device will
automatically shift to a working mode.
DATA ON THE DISPLAY:
ENERGY - first line of the display shows power.
In order to change the data on the display, press ENERGY button. The data are displayed in the following order:
Power (W)→Voltage (V)→Current (A)→Frequency (Hz) →Power factor →Power (W)
1. Power range：0.0 W～3680 W
2. Voltage range：150 V AC～276 V AC
3. Current range：0,000 A～16 A
4. Frequency range：50 Hz～60 Hz
5. Power factor range：0.00～1.00
TOTAL – second line of the display shows total cost.
In order to change the data on the display, press COST button. The data are displayed in the following order:
Total electric energy (kWh)→Total electric energy cost (€)→ Total amount of generated CO2 (Kg)→Total time in days (Day)→Electric
energy cost (€/kWh)→Total electric energy (kWh).
1. Total electric energy range：0.000 kWh～9999 kWh，
2. Total electric energy cost range：0.00 €～9999 €
3. CO2 emission range：0.00-9999 kg
4. Total time：0-9999 days
5. Electric energy cost adjustment range: 00.00 €/kWh～99.99 €/kWh
ON TIME – third line of the display shows total time.
Data are displayed in 00:00 format, where two first digits express minutes (2 digits first appear after 10 minutes lapse) and the other
two digits express seconds. When 60 minutes lapse, 00:00 will be again displayed, where two first digits express hours (2 digits first
appear after 10 hours lapse) and the other two digits express minutes. After 24 hours, the time will be recalculated.
NOTE: In real time status, all data are updated every second.
ADJUSTING THE PRICE PER 1kWh:
Press and hold SET for 3 seconds, in order to enter electric energy cost settings (in €/kWh).
Press UP in order to change the values.
Press SET in order to select next digit.
Press COST in order to confirm the settings.
** If you don't press any button within 10 seconds, the device will automatically exit the settings mode.
ENERGY OVERLOAD:
If you connect the socket with the load exceeding 3680W, ENERGY interface will flash on the display.
In order to completely reset the device and to return to default settings, press RESET for a short while.
Range of displayed cumulative electricity:

DANE TECHNICZNE

Zasilanie:
Maksymalny prąd:
Maksymalna moc:
Pomiar napięcia:
Zakres pomiarowy:
Wewnętrzny akumulator:
Waga netto:
PRODUCT DESTINATION

TECHNICAL DATA

Power supply:
Maximum current:
Maximum load:
Voltage range:
Cumulative cost of electriciy:
Cost electricity setting range:
230V AC, 50 Hz
16A
3680W
150V AC～276V AC
0,000 KWh～9999 KWh
0,00 €～9999 €
00,00 €/KWh～99,99 €/KWh
0.1~3680W
NiMH 3,6V; 40mAH
0,172 kg
OPERATION
230VAC, 50 Hz
16A
3680W
150V AC～276V AC
0,000 KWh～9999 KWh
0,00 €～9999 €
00,00 €/KWh～99,99 €/KWh
4
Power meter with LCD
User manual