ausdom X1 Pro Benutzerhandbuch Seite 6

Charging
Put both earbuds into the charging case and ensure the pins are in contact with the
earbuds. The earbuds will automatically power off and begin charging when the lid is
closed.
Charging the Charging Case
Plug the USB-C cable into the USB-C charging port on the earbuds' case. Check the
battery indicator. If the battery indicator shows nothing, check whether the charging
cable is connected well. The charging case supports wireless charging as well.
Operating Instructions
Bellow are the instructions for using the earphones.
Powering On
Either open the lid of the charging case or press and hold the multifunction button for
three seconds.
Powering Off
Either put the earbuds back into the charging case and close the lid or press and hold
the multifunction button for three seconds.
Answering/Rejecting the Incoming Phone Call
Press the multifunction button to answer incoming call and press again to hang up.
Reject the Incoming Call
Press the multifunction button for one to two seconds to reject the incoming call.
Automatically Connect with the Last Device
Open the lid, the earbuds will automatically connect with the device which has been
used with the earbuds for the last time.
Next Track
When music is playing, press and hold the multifunction button of the right earbud for
two seconds to switch to the next track.
4