Getting Started; Check Box Contents; Connecting The Telephone - Eldat Easywave Fon Alarm Bedienungsanleitung

Getting started

Important: please make sure you've read the safety information on
page 47 before you set up your phone system.
Important: Your phone can produce very high sound when Boost is
switched on. Please take care if the handset is used by others.

Check box contents

You should have:
• 1 corded phone base
• 1 power adapter plug
• 1 handset
• 1 coiled cord for handset
• 1 Wristband transmitter RT26 (splashproof)
• 1 telephone line connector cable
• 4 Batteries, AA 1.5 V
• 1 Battery type CR2032, 3V already installed in the emergency call unit
• 1 wall-mounting bracket
• 1 user guide
Important:
• Use only the power adapter supplied with your telephone.
• Use only the telephone cable supplied with your telephone
otherwise your phone may not work.

Connecting the telephone

For using all features e. g. Hands-Free and Amplification it is
essential that the telephone is powered by the power supply and the
batteries.
1. Insert the batteries in the open battery compartment.
Only use batteries of the type AA 1.5 V. Pay attention to the correct
polarity. Close the battery compartment cover.
31