Setup And Operation - StormRed SL-632N Benutzerhandbuch

Setup and Operation

1. Connect the adapter cable to the cable on the cushion.
2. Plug the home adapter into an outlet or the car adapter into your car's power
receptacle.
3. Turn on the massager and select your desired settings through below controller.
4. Additional dust-proof sleeve is provided to cover the massage heads for softening
purpose when needed.
Power Button
Press to turn on the
massager and activate
shiatsu clockwise
rotation at high level,
Press again to turn off
the massager
Intensity Button
When the massager is
turned on, Press to set
the shiatsu intensity at
high or low level
Note: Press the power button to turn on the massager and activate the default setting
massage mode i.e. the massage heads will rotate clockwise at high level of intensity and
with heating, until it auto shuts off or press the corresponding button to change it.
This device will switch off automatically after 15 minutes timer runs out.
Cushion side
4
Adaptor side
Direction Button
When the massager is
turned on, Press to shift
Shiatsu clockwise rotation
or Shiatsu anti-clockwise
rotation
Heat Button
When the massager is
turned on. Press to turn
on or off the heat