nedis HPBT5060BK Kurzanleitung Seite 8

•
Children of less than 8 years should be kept away.
•
Cleaning and user maintenance shall not be done by children without
supervision.
Charging the product
1. Plug the USB-C cable A
2. Plug the other end of the USB-C cable A
3. Plug the power adapter into a power outlet.
The status indicator A
4. Place the earphones into the respective slots A
charge the earphones.
The status indicator LEDs A
The status indicator LEDs A
charged.
The earphones and the charging case can charge simultaneously.
4
Switching on the product
Take the earphones out of the charging case. The earphones switch on
automatically.
Tap and hold both earphone touch controls A
4
manually switch on the earphones.
Pairing the earphones to a Bluetooth® audio source
1. Switch on the product to activate pairing mode.
The status indicator LEDs A
2. Enable Bluetooth® on the device you want to pair the earphones with.
3. Select "HPBT5060BK" from the list of available Bluetooth devices on your
device.
q into the USB-C port A
9 shows the charging progress of the battery.
34 on the earphones light up red.
34
switch off when the earphones are fully
34
blink to indicate pairing mode is active.
8
of the charging case.
q into a 5V/2A power source.
67
12
for 5 seconds to
8
and close the lid A
5 to