T'nB BTTRANSMITTER Gebrauchsanleitung Seite 7

CHARGING
BTTRANSMITTER is equipped with a rechargeable battery. It is recommended to
charge the battery fully before using the device for the first time.
Use the micro USB cable (8) provided. Insert the micro USB connector into the
micro USB port (5) and then connect it to a USB mains charger or a PC USB port.
The indicator light (3) will remain red when charging. When the battery is fully
charged, the indicator light (3) will turn blue.
It is possible to use BTTRANSMITTER when it is charging.
SWITCHING ON
ON: press (1) for 3 seconds
OFF: press (1) for 3 seconds.
BTTRANSMITTER will switch to standby after 5 minutes of inactivity.
To restart BTTRANSMITTER , press and hold (1).
INSTALLATION
Connecting a Smartphone to two speakers simultaneously
A) Insert the jack connector (2) into the jack socket of your Smartphone/tablet.
B) Turn on BTTRANSMITTER by pressing (1). The blue indicator light (3) will flash
for a few seconds, then alternately flash blue and red rapidly.
C) Switch on the first Bluetooth® speaker. After a few seconds, the pairing will
complete and a beep will sound. If the operation does not succeed, press (1).
Make sure that the distance between BTTRANSMITTER and your speaker is less
than 10 metres.
D) Switch on the second Bluetooth® speaker and repeat step (C).
The speakers are now connected to your Smartphone. You can listen to music
on both speakers simultaneously.
Connecting a Bluetooth® speaker or headset to a TV
A) Insert the jack connector (2) into the jack port of your TV.
B) Turn on BTTRANSMITTER by pressing (1). The blue indicator light (3) will flash
for a few seconds, then alternately flash blue and red quickly.
ICE_BTTRANSMITTER.indd 8
C) S
ring
pre
spe
D)
tan
If y
and
Con
con
con
foll
You
NO
The
cas
dev
If th
If B
- M
- Ch
- Tu
- Ch
th
13/09/2018 17