Cleaning And Maintenance - hkoenig KBP40 Bedienungsanleitung

CLEANING AND MAINTENANCE

To keep your ice tasting fresh and your ice maker looking
great, we recommend cleaning your ice maker at least
once per week.
1. Stop the ice-making cycle by pressing the "
key, unplug the ice maker from the wall outlet and allow
it to warm up to room temperature.
2. If residual water is found in the ice tray, gently push
the ice tray back so that all water drains into the water
reservoir.
3. Move the appliance forward to a place 60mm away
from the working table and open the drain plug to drain
out excess water (see Fig.1, Fig.2 and Fig.3).
4. Check and make sure the drain plug must be closed
well. Fill the water reservoir with clean water, press "
until the '
the pump will start to pump water and keep running for 6
minutes, and it will enter into standby condition after
running for 6 minutes, finally, open the drain plug and
empty the water.
5. Remove the ice basket.
6. Clean the ice maker interior with a soft cloth soaked
with warm water and vinegar, then rinse with clean water
and then drain all the water.
7. Replace the drain plug well in position. Wash the ice
basket and ice scoop in warm soapy water. Rinse and
dry.
8. Clean the exterior of the ice maker with a soft damp
cloth. Use a mild dishwashing soap, if necessary.
' indicator flashes, then press the "
"
"
" key ,