Safety Instructions; Technical Data - Hard Head 006418 Bedienungsanleitung

SAFETY INSTRUCTIONS

• Never open more than one drawer at
once if there are things in the drawers.
• Close the lid and lock the drawers and lid
before moving the cabinet.
• Do not mount the product on the back of
a lorry or other moving surface.
• Apply the castor brakes when not moving
the product.
• Push the product in front of you to move
it, do not drag it.
WARNING!
Do not climb, or stand on the product – risk
of personal injury.
SYMBOLS
Read the instructions.

TECHNICAL DATA

Size
Weight
DESCRIPTION
• Part of Hard Head's modular storage series.
• Made of powder-coated sheet metal.
• Side doors with gas damper.
• Seven bearing mounted drawers with
safety stop.
• 10 storage boxes.
• 12 tool hooks.
• Central lock with key.
• Sturdy wheels, two of which swivel with
stops.
ASSEMBLY
The cabinet has two swivel and braked wheels
and two fixed wheels. The side handle should
be mounted on the same side as the swivel
wheels.
89 x 103 x 53 cm
82 kg
USE
LOCKING / UNLOCKING
The tool cabinet has a central lock that locks
the drawers and doors. To lock the complete
unit, close all the drawers and doors, put
the key in the lock and turn a 1/2 turn
anticlockwise.
FIG. 1
To unlock the unit, put the key in the lock and
turn a 1/2 turn clockwise.
TAKE OUT A DRAWER
Pull the drawer all the way out. A black plastic
catch can be seen on each rail. Push the catch
on the left rail down, while pushing the catch
on the right rail up. The drawer can now be
pulled out off the rails.
FIG. 2
Replace the drawer by putting on the rails and
pushing it in.
MAINTENANCE
Lubricate the top and bottom channels on the
drawer guides at least twice a year.
EN
7