Safety Instructions - Bauknecht WTCH 6ZB CH N Kurzanleitung

SAFETY INSTRUCTIONS

Before using the appliance, read these safety
instructions. Keep them nearby for future
reference.
These instructions and the appliance itself provide
important safety warnings, to be observed at all
times. The manufacturer declines any liability for
failure to observe these safety instructions, for
inappropriate use of the appliance or incorrect
setting of controls.
Very young children (0-3 years) should be kept
away from the appliance. Young children
(3-8 years) should be kept away from the appliance
unless continuously supervised. Children from
8 years old and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge can use this appliance
only if they are supervised or have been given
instructions on safe use and understand the
hazards involved. Children must not play with the
appliance. Cleaning and user maintenance must
not be carried out by children without supervision.
Do not attempt to force the lid open.
PERMITTED USE
CAUTION: The appliance is not intended to be
operated by means of an external switching
device, such as a timer, or separate remote
controlled system.
This appliance is intended to be used in
household and similar applications such as: sta
kitchen areas in shops, o ces and other working
environments; farm houses; by clients in hotels,
motels, bed & breakfast and other residential
environments: areas for communal use in blocks of
ats or in launderettes.
Do not load the machine above the maximum
capacity (kg of dry cloth) indicated in the
programme table.
This appliance is not for professional use. Do not
use the appliance outdoors.
Do not use any solvents (e.g. turpentine,
benzene), detergents containing solvents, scouring
powder, glass or general purpose cleaners, or
ammable uids; do not machine wash fabrics that
have been treated with solvents or ammable
liquids.
INSTALLATION
The appliance must be handled and installed by
two or more persons - risk of injury. Use protective
gloves to unpack and install - risk of cuts.
Move the appliance without lifting it by the
worktop or top lid.
Installation, including water supply (if any) and
electrical connections and repairs must be carried
out by a quali ed technician. Do not repair or
replace any part of the appliance unless speci cally
IMPORTANT TO BE READ AND OBSERVED
stated in the user manual. Keep children away
from the installation site. After unpacking the
appliance, make sure that it has not been
damaged during transport. In the event of
problems, contact the dealer or your nearest
After-sales Service. Once installed, packaging
waste (plastic, styrofoam parts etc.) must be stored
out of reach of children - risk of su ocation. The
appliance must be disconnected from the power
supply before any installation operation - risk of
electric shock. During installation, make sure the
appliance does not damage the power cable - risk
of re or electric shock. Only activate the appliance
when the installation has been completed.
Do not install your appliance where it may be
exposed to extreme conditions, such as: poor
ventilation, temperatures below 5 °C or above
35 °C.
When installing the appliance make sure that
the four feet are stable and resting on the oor,
adjusting them as required, and check that the
appliance is perfectly to level using a spirit level.
If the appliance is being installed on wood or
" oating" oors (certain parquet and laminate
materials), secure a 60 x 60 x 3 cm (at least) sheet of
plywood to the oor then place the appliance on
top of this.
Connect the water inlet hose(s) to the water
supply in accordance with the regulations of your
local water company.
For cold ll only models: do not connect to the
hot water supply.
For models with hot ll: the hot water inlet
temperature must not exceed 60 °C.
The washing machine is tted with transport
screws and a transport bracket to prevent damage
during transport. Before using the washing
machine you must remove the transport
bracket (see "Installation guide"). After the
removal, cover the openings with the 2 enclosed
caps. Remove the bottom protection by tilting and
turning the washing machine on one rear bottom
corner. Make sure that the plastic part of the
bottom protection (if available on the model)
remains in the packing and not in the machine
bottom. This is important, as otherwise the plastic
part could damage the washing machine during
operation.
After installation of the device, wait a few hours
before starting it so that it acclimates to the
environmental conditions of the room.
Make sure that the ventilation openings in the
base of your washing machine (if available on your
model) are not obstructed by a carpet or other
material.
Use only new hoses to connect the appliance to
EN