Lanaform Heating Desk Pad Bedienungsanleitung Seite 5

onto the Heating Desk Pad and choose your
preferred heating zone. The product has been
designed to be used as a mouse mat.
If you wish to use the product to warm your
feet, ensure you place the product on a flat
surface, do not stand up on the mat, do not
put the foot of a chair on it, do not wear shoes
or snag the control pad.
Instructions
1 On/Off: connect the desk pad plug to
the power supply. Press the ON/OFF
button for 3 seconds, the digital dis-
play flashes 2 times. To turn off the de-
vice, press the ON/OFF button for 3 sec-
onds and the digital display will turn off.
2 When the device is on, press the ON/
OFF button briefly to select zone
H1, H2 or H3. (see DESCRIPTION)
3 When you have selected your
heat zone (H1, H2 or H3), press the
temperature button to choose your
temperature: 40°C, 45°C or 50°C.
Troubleshooting
Problem
The screen does
not light up
Only the upper/low-
er section of the desk
pad is heating up.
Reason
The plug is not con-
nected to the pow-
er supply.
The H1 or H2 zone has
been selected.
The device has 3 functions:
4 Reminder function: the digital display
flashes for 30 seconds every hour.
5 Memory function: the desk pad will
retain the zone and the temperature
last used when it is restarted.
6 For safety reasons, the Heating Desk Pad
will switch itself off after 4 hours of use.
Cleaning
Before cleaning, please turn off the power sup-
ply and disconnect the plug. Wipe the surface
of the screen with a soft, damp cloth, do not
use hard cleaning agents or corrosive deter-
gents (e.g. disinfectant) to avoid scratching and
damaging the surface. The Heating Desk Pad
is made of cotton, so you can use a hand-held
vacuum to clean it. If liquid has spilled on the
desk pad, use a damp cloth to clean the sur-
face and wait for the cotton to dry.
Storage
If you are not using the desk pad for a long time,
it is advisable to store it in its original packag-
ing in a dry place and do not place any objects
on top of it. Also, avoid folding it.
Solution
Please plug it in.
If you would like the upper section to heat up,
select H1 mode. For the lower section, select
H2 mode. To heat up the entire Heating Desk
Pad, choose H3 mode. If the zone you have
selected does not heat up, it means that the
heating surface has been damaged. Return it
to the supplier or their after-sales department.