Using An Electric Oven; Temperature Setting - Helper ET45LC Bedienungsanleitung

USING AN ELECTRIC OVEN

Before using for the first time, familiarize yourself with
the following oven functions:

TEMPERATURE SETTING

Turn the Temperature knob clockwise to the desired temperature setting.
The Temperature can be set from 100°C to 250°C.
Note: The heating elements are switched on and off alternately during
operation due to the correct functioning of the thermostat to maintain
the set temperature inside the oven.
Tip: To prevent food from sticking to the grill rack, coat it with oil.
To prevent food from baking, place baking paper in the tray.
DEFROSTING FUNCTION
1. Place the removable grill into the desired position.
2. Close the oven door.
3. Turn the Timer dial to the desired cooking time.
4. Put the Heater Selector switch on the
5. When finished defrosting, turn the Timer Selector dial till position OFF,
to switch off the oven.
BROIL FUNCTION
1. Insert the tray with food.
2. Close the oven door.
3. Put the Heater Selector switch on the
4. Turn the Timer dial to the desired cooking time.
5. When finished broiling, turn the Timer Selector dial till position OFF, to switch off the oven.
BAKE FUNCTION
1. Insert the tray with food.
2. Close the oven door.
3. Put the Heater Selector switch on the
4. Turn the Timer dial to the desired cooking time.
5. When finished baking, turn the Timer Selector dial till position OFF, to switch off the oven.
Note: If you would like to bake food directly on the rack, place a tray with water under it so that
the juice from the food can drip into it.
TOAST FUNCTION
1. Place the removable grill into the desired position.
2. Place the tray on the grill, close the oven door.
3. Turn the Timer dial to the desired cooking time.
4. Put the Heater Selector switch on the
5. When finished toasting, turn the Timer Selector dial till position OFF, to switch off the oven.
CONVECTION FUNCTION
1. Remove the Baking Rack from the oven and set aside.
2. Put the Heater Selector switch on the
3. Put the Heater Selector switch on the
4. Put the Heater Selector switch on the
5. Select the length of time you want.
22
str
on position.
on position.
on position.
on position.
or on position.
on position: all heating elements and fan are working.
on position: lower heating elements and fan are working.