Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Installation
A. Hardware Installation
Before you start please check as follows:
Windows 2000, XP(32/64bit), Vista(32/64bit) or Windows 7 (32/64bit) has
been installed in your system and is running properly.
Any other sound card was deinstalled and the software completely removed.
If your system has Sound On Board please deinstall the sound card completely,
remove the software and deactivate the sound card in BIOS. For more information
please check the manual of your motherboard or contact the manufacturer of your
motherboard.
Turn off your computer and disconnect all power cords.
4. Remove the case of your computer. (Refer to your PC 's manual for more details.)
5. Plug the Sound Card into any free 32 bit expansion PCI slot of your motherboard
and fix it with a screw in your computer.
6. Connect the audio cable of your CD-ROM or DVD-ROM drive with the CD-IN
socket of the Sound Card. You can connect another device with the AUX-IN socket of
your Sound Card.
7. Put the computer cover case on and reconnect the power cords.
Connecting Audio Devices
You can connect various types of audio equipment, such as speakers, headphones, CD
players, etc. to the Sound Card through its back panel jacks. Please refer to the following
diagram.
Layout OctoSound 7.1
Werbung
Inhaltsverzeichnis
