Werbung
• Luce Scale alla ricezione di un comando (locale o remoto) lo stato del carico viene commutato in
ON temporizzato. Se il pulsante frontale viene premuto durante lo stato di ON, la temporizzazione
ripartire dall'inizio. Diversamente se il dispositivo riceve un comando remoto di OFF il carico si
spegne.
• Tapparella standard: alla pressione breve del pulsante la tapparella si movimenta in modalità a
uomo presente nel verso di pressione del tasto; alla pressione prolungata del pulsante (per due
secondi) la tapparella si movimenta fino a fine corsa nel verso di pressione del tasto.
• Tapparella con oscurante: alla pressione breve del pulsante la tapparella si movimenta in modalità a
uomo presente nel verso di pressione del tasto; alla pressione prolungata del pulsante (per due
secondi) la tapparella si movimenta con una sequenza iniziale di spostamenti impulsivi proseguendo
successivamente con la movimentazione fino a fine corsa nel verso di pressione del tasto.
Mediante l'App AVE Cloud possono essere impostati i seguenti parametri globali:
• Personalizzazione del nome;
• Utilizzo del feedback acustico per la pressione del tasto;
• Impostazione della sensibilità del touch;
• Luminosità LED: minima, media o alta;
• Stato del carico in ognuna delle 16 scene;
• Credenziali cloud IoT AVE e collegamento con Assistenti vocali .
Configurazione
Per le operazioni di messa in funzione del sistema seguire la configurazione guidata presente nell'App AVE
Cloud. Successivamente all'abbinamento del dispositivo al proprio impianto, la configurazione avanzata
dei parametri e delle modalità di utilizzo avviene mediante l'accesso alla sezione EasyConfig presente nel
menù impostazione dell'applicazione AVE Cloud (password di accesso: "2").
Compatibilità Assistenti Vocali: Google Assistant® e Amazon Alexa®
In fase di configurazione viene richiesta l'abilitazione della modalità Access-Point Wi-Fi® in un dispositivo
wireless a scelta tra quelli presenti nell'impianto, al fine di consentire all'applicazione AVE Cloud di connettersi
ad esso. Se vi sono altri dispositivi DOMINA smart wireless IoT presenti nell'impianto, è fondamentale che il
dispositivo in questa modalità non sia quello più vicino al ROUTER DOMESTICO, in quanto quello più vicino
dovrà essere il dispositivo con abilitata la modalità Root-Node (vedi immagine).
ENG
442TC16-W - IoT - 3-module Multi-touch control S.44
The 442TC16-W multi-touch control block is a 2.4GHz wireless electronic device. It is a multi-function
appliance with IoT technology on standard Wi-Fi®to create IoT and IEEE 802.11 domina smart mesh
network systems. 230 VAC power supply, to be completed with 3-module touch plates.
The electronic multi-touch control from the DOMINA smart wireless IoT range has: two local IoT relays
(L1; L2) that act in pairs to control a diverter or roller shutter control (the two relays have an AVEbus
address). Two contact closure relays (L3; L4 - relays with no addresses) which close when there is
pressure on the keypad and open when the appropriate configured keys are released. An input (P) for
an external pulse command to switch relays L1; L2 if they are configured as diverters.
The front area of the device is divided into 9 sensitive zones, divided into 3 columns of 3 zones each.
The central zone, or the two high+low zones, or no zone can be activated for each column. You can,
therefore, have from a minimum of one (at least one zone must be defined) active sensitive zone up
to a maximum of 6 zones.
During programming, you can choose which zones to activate and which functions to assign by
configuring the columns:
• a column is used to operate the pair of local relays and can be configured by means of the
middle touch button to manage the diverter, or by means of the up/down touch buttons to
manage the roller shutter;
• the other two columns can be used to control:
o the local relay without address only by means of the middle touch button;
o remote devices through the sending of radio frames to diverters or IoT sockets with column
set by means of themiddle touch button, or up/down button, or both keys with different
controls;
or scene retrieval.
There is also a mode in which none of the columns are connected to the local IoT load with an address,
in which case the touch keypad becomes a pure control element.
The device does not require a communication gateway and can, therefore, be managed in two ways:
• Wi-Fi® DIRECT mode. A device of your choice within the system is identified as a Wi-Fi®
Access-Point. By independently generating the Wi-Fi® grid, it enables local dialogue with the
AVE Cloud application;
• DOMESTIC ROUTER mode. A device of your choice in the system is identified as the Root-Node.
Connecting to the Wi-Fi® grid (generated by the home router) allows the monitoring, both local
and remote, via the AVE Cloud application and popular cloud-connected Voice Assistants.
IMPORTANT: the electronic device must be powered with the same Line (L) and Neutral (N) that powers
the load (see diagram). If the IoT diverter function is set, the load must be greater than 5W for correct
detection. If an inductive load is connected, we recommend installing an RC filter (snubber) to be
connected near the load.
Technical specifications
Mechanical
Compatible with all elements of System 44.
• Container:
• Degree of protection:
• Weight:
Signalling
Optical signals (LEDs) are visible on the front in the enabled areas: both the intensity and the colour
can be set during programming (blue, amber or purple). When the touch is recognized, the LED
emits a more intense light.
Button
Front touch buttons. Side button for programming (the button must be pressed using a slotted
screwdriver)
Connections
8-pole 16A 250V~ terminal block
• Insulation stripping:
• Screw:
• Tightening torque:
• Capacity:
• Opening:
• Terminal L1:
• Terminal L2:
• Terminal L3:
• Terminal L4:
3-module S44 (67 l x 45 h x 40 d) mm
IP20. When installed in the appropriate containers: IP40
90 g
6 mm
slotted screwdriver head 3 x 1 mm
0.5 Nm
flex wire 0.14 ÷ 2.5 mm2 (26 ÷ 13 AWG)
rigid wire 0.14 ÷ 4 mm2 (26 ÷ 11 AWG)
2.5 mm x 3 mm
Line to IoT Device interrupted (Roller shutter Div/UP)
Line to IoT Device interrupted (Roller shutter Div/Down)
Line to First Local Stand Alone Button interrupted
Line to Second Local Stand Alone Button interrupted
Scelta del dispositivo Access-Point Wifi
Scelta del dispositivo Access-Point Wifi
Root-Node è in posizione sfavorevole).
NOTA: L'impianto DOMINA smart wireless IoT permette la creazione
di impianti composti da massimo 50 periferiche Wi-Fi mesh.
Procedura di reset
Per effettuare il reset e riportare il dispositivo alle condizioni di fabbrica, nei primi 60 minuti da quando il
dispositivo viene alimentato, premere per almeno 15s il tasto laterale PRG.
• Terminals P:
• Terminal L:
• Terminal N:
Radio specifications
• Wi-Fi 802.11b/g/n
• Access point (AP) Station (STA), B, G, N or mixed mode -mesh network-
• WPA2.PSK encryption
Power supply voltage
• Rated voltage:
• Tolerance:
• Max absorption @ 230V~:
Weather conditions
• Reference temperature and relative humidity: 25°C RH 65%
• Operating ambient temperature range: from -5°C to +35°C (indoors)
• Maximum Relative Humidity: 90% at 35°C
• Max altitude: 2000 m a.s.l.
Controllable loads
If programmed as diverter
• Incandescent lamps: 500W @ 240VAC
• LED lamps: 100W @ 240VAC
• Fluorescent lamps: 120W @ 240VAC
If programmed as a roller shutter switch
• Engine load: 2 A @ 240VAC cosϕ 0.65.
• Engine load: 2 A @ 100VAC cosϕ 0.65
Protections
Overload and short-circuit protection
Insert a 1.5kA (min) C10 circuit breaker in series with the circuit
Overtemperature safety protection
PTC resettable thermal fuse built into the appliance. It trips when there are internal faults that may
lead to dangerous over-temperatures.
Installation and Maintenance Rules
Installation and maintenance operations must be performed by qualified personnel in compliance
with the regulations governing the installation and maintenance of electrical equipment in force in the
country where the products are installed.
- Before working on the system, disconnect it by switching off the main switch (symbol
- The electronic device must be powered by the same Line L and Neutral N that power the load
- In terms of electrical safety, this device complies with the reference standard when it is installed in
recessed or wall-mounted boxes with S.44 brackets and plates.
- Inside the same box, the side of the IoT wireless smart device marked with the symbol
not be flanked by another electronic device. At least the space of half a module should be left free.
- If this device is used for purposes not specified by the manufacturer, the protection provided may
be compromised.
- Observe the maximum current and voltage values specified for the device.
- The relay output supply circuit must be protected against overloads by a device, fuse or circuit
breaker, with a rated current not exceeding 10 A.
Regulatory compliance
• Radio Equipment Directive (RED). RoHS Directive.
• Low Voltage Directive (LVD). Standards EN61010-1, EN_61010-2-030.
• EMC Directive. Standards EN 61000-6-1, EN 6100-6-3.
AVE SpA declares that the radio equipment complies with Directive 2014/53/EU. The full text of the EU
Declaration of Conformity can be found in the product data sheet at the following address: www.ave.it.
WEEE - Information for users
The crossed-out bin symbol on the appliance or on its packaging indicates that, at the end of
its life, the product must be collected separately from other waste. The user must therefore deliver
the equipment to appropriate separate collection centres for electrotechnical and electronic waste.
Alternatively, the equipment can be handed over, free of charge, to the distributer when a new piece of
equivalent equipment is purchased. At distributors of electronic products with a sales area of at least
400 m
2
it is also possible to hand over, free of charge, electronic products smaller than 25 cm, without
having to purchase new equipment. An efficient separate waste collection leading to the subsequent
recycling of the disused appliance, or disposal compatible with the environment contributes to avoiding
®
corretta.
non corretta (il dispositivo
®
Button input for remote operation
Line
Neutral
230V~ 50Hz
±10%
1.2W, 2.6W with energized relay.
).
should
Werbung
