Inhaltsverzeichnis
Werbung
Appendix (English)
Technical Specifications
Specifications are subject to change without notice.
TS408
Output Power
Drivers
Crossover Frequency
Maximum SPL
Frequency Response
Frequency Range
Horn Coverage
Connectors
Input Impedance
Line Gain/Volume Control
Range
Mic/Inst. Gain/Volume
Control Range:
USB Charging Port
Controls
Indicators
Power
Protection
Enclosure
Mounting/Installation
Operating Temperature
Dimensions
(height x width x depth)
Weight
2000 W
Low-Frequency: 8.0" driver, 2.0" (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 .
High-Frequency: 1.0" exit ceramic driver with 1.4" (35 mm) coil. 1 x 350 W @ 4 .
2 kHz
130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
62 Hz – 20 kHz (+/-3 dB)
52 Hz – 20 kHz (-10 dB)
90° horizontal x 60° vertical (nominal)
(2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced)
(1) XLR output (Link)
(1) IEC power cable input
Line: 10 K balanced, 20 K unbalanced, Mic: 1.2K
-’ to 0 dB, +4 dBu nominal, +10 dBu for max output
-’ to +50 dB
5V 2.1A
Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control
encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
(1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red =
Ch1/2 Output Clipped)
(1) Bluetooth LED (Blue)
(1) Link LED (Orange)
(4) DSP Presets LED (Green)
(3) HPF LED (Green)
Connection: IEC
Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
Consumption: 900W
Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
Electronic clip, thermal, and transducer overdrive protection
Injected Molded Enclosure and Perforated Metal Grille
Standard 36 mm pole socket, flown application, suspended with integral M6 points, or in a wedge
monitor position
-10°C to 45°C (14°F to 113°F)
17.2" x .10.1" x 9.6 / 436 x 256 x 245 mm
20.7 lbs. / 9.4 kg
Werbung
Inhaltsverzeichnis
