FND 1000
Do not fill the pot more than 80% of its maximum capacity (max
☞
2,0 l); this to avoid that the content overflows, risking to cause
scaldings or burns.
Do not use the pot if its
content is lower than the
"MIN" indication.
• Place the ring with the forks slots (4) on the pot (3).
• The appliance is ready for use.
• Unroll the electrical power cord (8) completely.
• Turn the thermostat (7) on "0".
• Connect the power plug to the power socket making sure that the mains power
corresponds to the one indicated on the appliance rating label.
• Turn the thermostat (7) on the maximum temperature (MAX).
• The indicator light (8) turns on (heating phase) and then turns off when reaching the
set temperature (appliance ready).
During the first use of the appliance a light smoke emission accompanied
by a particular smell could occur. This is a normal phenomenon which
will automatically disappear.
Prepare an appropriate ventilation.
Do not move the appliance when it's hot.
☞
If it'll be necessary to move it, operate extremely carefully,
holding it only from the appropriate handles (2).
Danger of burns or scaldings !
Use the little forks carefully: once left in the pot their metallic
☞
part overheats.
Burns danger!
USE
EN
MAX
MIN
53