Introduction - Smeg SGR10S Betriebsanleitung

SGR10S

1 Introduction

Preface
First of all we would like to sincerely thank you for buying the SGR10S cycle sealing device.
In these instructions you will find information about the device, its function and operation.
Please read these operating instructions thoroughly before putting the device into
operation so that you become familiar with its capabilities and can use its functions
optimally.
F
Always keep these instructions close to the device.
Important notice:
This device is a film rotary sealing device for closing sterile barrier systems.
Please observe chapter "Correct use" in these operating instructions in this respect.
In accordance with the purpose, CE certification based on the EU Directives indicated below
has been affixed: 2006/42/EC and 2006/95/EC.
Directive 93/042 EEC is not applicable to welding and sealing devices.
The limit values of IEC 60601-1 cannot be used with electrical re-tests.
The manufacturer shall accept no liability whatsoever for damage caused by tests which are not
listed in the Declaration of Conformity.
Page GB 2
All manuals and user guides at all-guides.com
Introduction
Note
Because we are constantly improving our products
we reserve the right to update these operating
instructions and the functions described in them
accordingly
Should you nevertheless notice errors or points that
are unclear, please let us know about them.
These operating instructions are valid for products
as from the date of manufacture of 07/2008
9.696.035
.
ENGLISH
Chapter 1
Version 1.02