Lindy 38338 Benutzerhandbuch Seite 11

User Manual
If 4K output is sent to a display which can't support 4K, 4K-AUTO command can be enabled, the unit will
change the output resolution according to displayer's capability.
Command
SET OUT 4K-AUTO x
GET OUT 4K-AUTO
The following commands are used to select Auto Switch mode:
Command
SET AUTO SWITCH x
GET AUTO SWITCH
Troubleshooting
There is no display on the screen.
It has been found that there are significant differences in the cable lengths/types and even input ports
which can be used on different brands of display using HDMI 18G 4K@60Hz resolutions. If problems are
experienced, please apply the following steps:
Try a different input port on the display.

Reduce the cable length on the Input and Output to 1m.

Try a different type of 1m HDMI Cable.

Check that the DC plug and jack used by the external power supply is firmly connected and that

the power LED is illuminated on both the Transmitter and Receiver.
Check that the Cat.6/7 cable is plugged in correctly and that the Connection LED on the left side

of both the HDBaseT In and Out ports are illuminated.
For several HDMI devices it may be helpful to unplug and re-connect their HDMI connection to re-

initiate the HDMI handshake and recognition.
Power off all the devices, then power on in this order: first, the extender, then the display and finally

the source.
Reduce the length of Cat.6/7 or HDMI cable used or use an higher quality cable.

Please Note: Lindy recommends No. 38214 as HDBaseT receiver to reach up to 4K60, max. resolution
will be scaled up to 4K30 using any other HDBaseT receiver. Refer to HDBaseT receiver's features to
know the max. distance supported.
Lindy regularly checks and tests our product range to ensure maximum compatibility and performance.
For the most up to date version of this manual, please refer to your local Lindy website, search for the
relevant part number and find the manual under Downloads.
Details
x is one of ON (default), OFF.
Example:
Send: SET OUT 4K-AUTO ON
Receive: OUT 4K-AUTO ON
Get the current OUT 4K-AUTO mode.
Example:
Send: GET OUT 4K-AUTO
Receive: OUT 4K-AUTO ON
Details
x is one of ON, OFF (default).
Example:
Send: SET AUTO SWITCH ON
Receive: AUTO SWITCH ON
Get the current AUTO SWITCH mode.
Example:
Send: GET AUTO SWITCH
Receive: AUTO SWITCH ON
English