Placement And Mounting; Wall Mounting (If Using Option-B) - Hisense AX2106G Benutzerhandbuch

4.3 Placement and Mounting

4.3 Placement and Mounting
Placement Placement
A If your TV is placed on a table, you can place A If your TV is placed on a table, you can place
the unit on the table directly in front of the the unit on the table directly in front of the
TV stand, centered with the TV screen. TV stand, centered with the TV screen.
B If your TV is attached to a wall, you can B If your TV is attached to a wall, you can
mount the unit on the wall directly below the mount the unit on the wall directly below the
TV screen. TV screen.

4.4 Wall Mounting (if using option-B)

4.4 Wall Mounting (if using option-B)
Note: Note:
- -
personnel only. Incorrect assembly can personnel only. Incorrect assembly can
result in severe personal injury and property result in severe personal injury and property
damage (if you intend to install this product damage (if you intend to install this product
yourself, you must check for installations yourself, you must check for installations
such as electrical wiring and plumbing such as electrical wiring and plumbing
that may be buried inside the wall). It is the that may be buried inside the wall). It is the
installer's responsibility to verify that the wall installer's responsibility to verify that the wall
will safely support the total load of the unit will safely support the total load of the unit
and wall brackets. and wall brackets.
- Additional tools (not included) are required - Additional tools (not included) are required
for the installation. for the installation.
- Do not overtighten screws. - Do not overtighten screws.
- Keep this instruction manual for future - Keep this instruction manual for future
reference. reference.
- -
wall type before drilling and mounting. wall type before drilling and mounting.
1
2
10 10
~50mm/2.0"
927 mm / 36.5''
1
2
• To prevent injury, this apparatus must be securely • To prevent injury, this apparatus must be securely
installation instructions. installation instructions.
• Suggested wall mounting height: ≤ 1.5 meters. • Suggested wall mounting height: ≤ 1.5 meters.
1. Drill 2 parallel holes (Ø 5.5-6 mm each 1. Drill 2 parallel holes (Ø 5.5-6 mm each
according to wall type) in the wall. The distance according to wall type) in the wall. The distance
between the holes should be 927 mm. between the holes should be 927 mm.
2. 2.
necessary. Tighten the wall mount brackets on necessary. Tighten the wall mount brackets on
the wall with screws and screwdriver (included). the wall with screws and screwdriver (included).
Make sure that they are securely installed. Make sure that they are securely installed.
3. Remove the screws at the back of the unit. 3. Remove the screws at the back of the unit.
Install the wall mounting screws into the Install the wall mounting screws into the
back of the unit. back of the unit.
4. Lift the unit onto the wall mount brackets 4. Lift the unit onto the wall mount brackets
and slot into place. and slot into place.
~50mm/2.0"
927 mm / 36.5''
. 1 2 '
m / 0
~ 3 m ~ 3 m
A A
WARNING WARNING
~3mm/0.12" ~3mm/0.12"
4mm/
. 1 2 '
0.16"
m / 0
>25mm/0.98" >25mm/0.98"
B B
4mm/
0.16"
3 3